#3 UV dtf wrap| 16oz UV Dtf cup wrap

This listing includes one (1) UV DTF adhesive wrap for a 16oz glass cup.

Easy application - Carefully apply & Peel!
Waterproof
No heat press needed.
May be applied to any hard surfaces.
But is specifically made to fit 16oz libbey glass can cups!

UVDTF INSTRUCTIONS:

FIRST wrap your cup to make sure it is the right size, all cup makers have slight differences and you will want to make sure none of the wrap is overlapping and that none needs to be trimmed!

Make sure glass/plastic is clean from any hand oils or dirt and dry.

Peel off white or clear backing that comes with it. Make sure all pieces lift off while peeling.

Make sure the wrap and cup are lined up correctly and begin pressing, starting with one side and working around the cup, or working from the center outwards, pushing out any air bubbles.

! REMEMBER These wraps are permanent! Once your wrap hits any surface, it WILL stick, pulling up on it may result in your decal breaking!

Once you have worked all the way around the cup, go over each part with a squeegee or your fingers to make sure there are no air bubbles as you go.

Your last step is to remove that clear film carrier sheet, go slow! The carrier sheet may be very sticky or hard to remove, just go slow! When peeling, it is recommended you peel back, laying the film back onto itself rather than pulling it up while peeling.

Queenb Crafting Corner is not responsible for user error. This includes (but is not limited to) damage while applying the wrap or damage from washing.

** All sales are final **